Before buying a replacement hydraulic brake, check the parts that actually determine fit: the brake model, motor cut-off connector, hose length, rotor setup, and brake fluid.
Replacing the hydraulic brakes on an e-bike is not quite the same as replacing brakes on a regular bicycle. Many e-bikes also use a motor cut-off connection, so a brake that looks similar may still be the wrong fit.
If your Lectric e-bike uses a compatible STAR UNION brake system, this guide will help you understand what to check before ordering a replacement—and when the STAR UNION 240PYD may be a suitable option.
Do not choose a replacement brake by bike model alone. Match the actual brake system on your bike first.
When Should You Replace Your E-Bike Brakes?
Not every braking problem means you need a complete new brake set. Worn pads, rotor contamination, or a caliper that needs adjustment may only require maintenance.
A complete replacement may make more sense when you notice:
- Weak or inconsistent braking
- A lever that feels unusually soft
- Visible hydraulic fluid leakage
- A damaged lever, hose, or caliper
- Motor power that does not cut when the brake lever is pulled
- A brake system that has become difficult or uneconomical to repair
| What to Check | What to Look For | Why It Matters |
|---|---|---|
| Brake model | Branding or model number on the lever/caliper | Helps identify the original brake system |
| Motor cut-off connector | Pin count, connector shape, male/female end | The electrical connector must match |
| Hose length | Front and rear routing length | A hose that is too short cannot reach the caliper safely |
| Rotor & brake mount | Rotor diameter and PM/IS mounting setup | Determines caliper position and adapter needs |
| Brake fluid | Mineral oil or DOT fluid | Different fluid types must not be mixed |
Check the Brake Model on Your E-Bike
Start with the brake already installed on the bike. Look at the brake lever and caliper for a brand name, model number, or other identifying marks.
If you see STAR UNION, WUXING, or a marking such as 602, take a clear photo before removing anything.
Do not assume every Lectric e-bike uses exactly the same brake system. Components can vary by model, production batch, specification, or previous modifications.
Match the Parts on Your Bike, Not Just the Bike Name
The safest way to choose a replacement is to compare the actual brake components already installed. A clear photo of the caliper, lever, connector, and rotor can prevent most fitment mistakes.
Check the Motor Cut-Off Connector
Many e-bike brake levers include an electrical switch connected to the motor controller. When the brake lever is pulled, the system sends a signal that helps interrupt motor power while braking.
This function is commonly called a motor cut-off, motor inhibitor, or e-bike brake sensor.
The STAR UNION 240PYD uses a 2-pin male motor cut-off connector. Before ordering, compare the number of pins, connector shape, and male/female configuration with your current brake.
Measure the Brake Hose Length
The STAR UNION 240PYD comes with:
- Front hose: 1000 mm
- Rear hose: 1800 mm
Compare those lengths with the routing on your current bike. Frame size, folding points, handlebar height, suspension, and cable routing can all affect the length you need.
A longer hose can sometimes be routed or professionally shortened. A hose that is too short cannot safely reach the caliper.
Small Fitment Details Make a Big Difference
Connector type and hose length are easy to overlook, but both can decide whether a replacement brake installs cleanly. Check them before you remove your original brake.
Check Your Rotor Size and Brake Mount
The STAR UNION 240PYD can be used with 160 mm and 180 mm rotor setups, but the required adapter depends on the frame or fork, rotor size, and brake mount.
Before ordering, identify:
- Rotor diameter — often marked directly on the rotor
- Brake mount — for example, Post Mount (PM) or International Standard (IS)
- Adapter requirement — changing rotor size may require a different adapter
Check the Brake Fluid
The STAR UNION 240PYD uses mineral oil. Do not use DOT brake fluid in this system.
If the hose needs to be shortened or the hydraulic system is opened, use the correct mineral oil and compatible service tools. Professional installation is recommended if you are unsure about hydraulic brake servicing.
STAR UNION 240PYD
If your e-bike uses a compatible STAR UNION 602 brake setup and a matching 2-pin motor cut-off connection, the 240PYD may be a suitable replacement option.
Will the 240PYD Fit My Lectric E-Bike?
The safest answer is to check the brake system on your bike, not only the bike model name. If your Lectric e-bike currently has a STAR UNION 602 brake system, compare these four items before ordering:
- Existing brake: look for STAR UNION / WUXING / 602 markings
- Connector: confirm a compatible 2-pin connection
- Hose length: compare your routing with 1000 mm front / 1800 mm rear
- Rotor and mount: confirm rotor diameter and adapter requirements
Send us clear photos of your brake caliper, brake lever, electrical connector, rotor, and e-bike model. Our team can help you check compatibility before you order.
What Does Hydraulic Brake Installation Look Like?
A pre-bled brake can make a straightforward replacement easier when the supplied hose length works for your bike. If the hose is shortened or the hydraulic system is opened, another bleed may still be required.
Note: Installation shown with another STAR UNION hydraulic brake model. The general installation process is similar, but components and specifications may vary by model.
What Comes With the STAR UNION 240PYD?
- 1 × Front hydraulic brake
- 1 × Rear hydraulic brake
- 2 × 2-pin motor cut-off connectors
- Pre-installed ceramic brake pads
- 4 × M6 mounting screws
- 1 × Product manual
Frequently Asked Questions
Are STAR UNION 240PYD brakes pre-bled?
Yes. The front and rear brakes are pre-filled with mineral oil. If the hose is shortened or the hydraulic system is opened during installation, bleeding may still be required.
Does the 240PYD have a motor cut-off function?
Yes. The 240PYD uses a 2-pin male motor cut-off connector. Compare it with your existing connector before ordering.
Can I replace a STAR UNION 602 brake with the 240PYD?
The 240PYD may be a replacement option for compatible STAR UNION 602 setups. Confirm the connector, hose length, rotor size, and mounting configuration first.
Will the 240PYD fit every Lectric e-bike?
No. Compatibility should be checked using the actual brake system and connector on the bike rather than the Lectric brand name alone.
What brake fluid does the 240PYD use?
The 240PYD uses mineral oil. Do not use DOT brake fluid.
Are rotors and brake adapters included?
No. Brake rotors and PM/IS adapters are sold separately.
Can I install the brake myself?
A direct replacement can be easier because the system arrives pre-bled. If you are unsure about hose routing, caliper alignment, connector compatibility, hose shortening, or brake bleeding, professional installation is recommended.
Check Fitment Before You Order
Confirm the brake model, connector, hose length, rotor setup, and mounting requirements first. If your e-bike uses a compatible STAR UNION 602 / 2-pin setup, the 240PYD offers a pre-bled front and rear hydraulic replacement option.
Shop STAR UNION 240PYD
